Zum Inhalt springen
Yardox
Diese Sprachversion wird gerade von einem Muttersprachler geprüft. Einzelne Formulierungen können sich noch ändern.

Electricity usage calculator

List your appliances and see how many kWh each one uses per day, month and year, what it costs, and how much power they draw together.

Your appliances

Add the appliances you use and how long they run. You get the electricity per day, month and year, the cost, and the power a battery or inverter must supply.

W
h

Typical nameplate 350–500 W. Your appliance's label or manual is better.66 kWh / year

Days per week, standby, energy label, motor
per week
%

100 % for a kettle or lamp. Less for anything with a thermostat, such as a heater.

W

When switched off but plugged in. Leave empty if unknown.

W
h

Typical nameplate 1.500 W. Your appliance's label or manual is better.110 kWh / year

Days per week, standby, energy label, motor
per week
%

100 % for a kettle or lamp. Less for anything with a thermostat, such as a heater.

W

When switched off but plugged in. Leave empty if unknown.

W
h

Typical nameplate 750–1.100 W. Your appliance's label or manual is better.84 kWh / year

Days per week, standby, energy label, motor
per week
%

100 % for a kettle or lamp. Less for anything with a thermostat, such as a heater.

W

When switched off but plugged in. Leave empty if unknown.

W
h

Typical nameplate 120 W. Your appliance's label or manual is better.175 kWh / year

Days per week, standby, energy label, motor
per week
%

100 % for a kettle or lamp. Less for anything with a thermostat, such as a heater.

W

When switched off but plugged in. Leave empty if unknown.

W
h

Typical nameplate 50 W. Your appliance's label or manual is better.73 kWh / year

Days per week, standby, energy label, motor
per week
%

100 % for a kettle or lamp. Less for anything with a thermostat, such as a heater.

W

When switched off but plugged in. Leave empty if unknown.

Price and peak load

/kWh

From your bill, in your currency, including the per-kWh fees.

×

Motors draw about 3 times their running power for a moment when they start.

Per month42 kWh
Add this calculator to your website

Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.

So nutzen Sie den Rechner

  1. 01Pick an appliance from the list or choose "Other" and type its name.
  2. 02Enter the power from its label. The list shows the typical range if you don't have the label to hand.
  3. 03Enter how many hours a day you use it and on how many days a week.
  4. 04For a fridge or freezer, switch to "From the label" and type the kWh per year from the energy label.
  5. 05Enter your electricity price to see the cost. Tick "Has a motor" for pumps, compressors and washing machines so the starting surge is counted.

So wird gerechnet

The US Department of Energy gives the method: power in watts times hours of use, divided by 1,000, is the energy in kilowatt-hours. We add the days per week, the share of time a thermostat keeps the appliance running, and standby power for the rest of the day.

Energy per day
E = P × h × (days ÷ 7) × share + P standby × (24 − h × days ÷ 7)
From the label
E per day = kWh per year ÷ 365
Per month
E month = E day × 365 ÷ 12
Cost
cost = kWh × price per kWh
Starting surge
surge = sum of all running power + (factor − 1) × largest motor

Typical power values in the list are the middle of the nameplate ranges published by Virginia Cooperative Extension (Virginia Tech, 2020). The nameplate shows the most the appliance can draw; many use less most of the time, so your own label or a plug-in meter gives a better number.

A fridge is switched on all day but its compressor cycles. The same source suggests counting about a third of the plugged-in time at full power; the kWh per year on the energy label is more accurate for a modern fridge.

Motors draw about three times their running current while starting. The surge figure adds that for the largest motor, assuming two motors rarely start in the same second. Use it to choose an inverter or a generator, together with the peak load.

Rechenbeispiel

A kettle, a TV and a washing machine

  1. Kettle 1,500 W, 12 minutes a day: 1,500 × 0.2 ÷ 1,000 = 0.30 kWh per day.
  2. TV 120 W, 4 hours a day: 120 × 4 ÷ 1,000 = 0.48 kWh per day.
  3. Washing machine 425 W, 1 hour, 3 days a week: 425 × 1 × 3 ÷ 7 ÷ 1,000 = 0.18 kWh per day.
  4. Total 0.96 kWh per day, 350 kWh per year. At 0.30 per kWh that is 105 per year.
  5. Peak load 2,045 W; with the washing machine motor starting at 3 times its power, 2,895 W.

Richtig bestellen

Start with the big users

Anything that heats water or air (water heater, dryer, heater, kettle) uses far more than electronics. Get their hours right first.

Check the result against your bill

If the list adds up to much less than your bill, something is missing: often a water heater, heating, a second fridge or a pump.

Use a plug-in meter for one appliance

A simple plug-in energy meter shows the real kWh of anything with a plug over a week. Enter that number with "From the label".

Size an inverter on peak and surge

An inverter must carry the peak load continuously and the surge for a moment. Most data sheets give both numbers.

Häufige Fehler

  • Counting a fridge at its nameplate power for 24 hours. That is about three times too much.
  • Mixing up watts and watt-hours. Power is how fast energy is used; energy is power times time.
  • Leaving out standby. Ten devices on 2 W standby use about 175 kWh a year.
  • Taking the electricity price without the per-kWh network fees and taxes. Use the total price per kWh from your bill.

Fragen

How do I calculate the electricity use of an appliance?

Multiply the power in watts by the hours of use per day and divide by 1,000. A 100 W device used 5 hours a day uses 0.5 kWh a day, about 183 kWh a year.

How much electricity does a fridge use?

Look at the energy label: it states kWh per year. Counting the nameplate power for 24 hours overstates the use, because the compressor runs only part of the time.

What is the difference between kW and kWh?

kW is power, how much the appliance draws at a moment. kWh is energy, power over time, and is what you pay for.

What size inverter do I need?

At least the peak load of everything that can run at the same time, and a surge rating above the starting surge. Leave some headroom: inverters give less power when they are hot.

Quellen

  1. [1]Estimating Appliance and Home Electronic Energy Use. U.S. Department of Energy, Energy Saver. Daily energy = wattage × hours used per day ÷ 1000 (kWh). Refrigerators are switched on all the time but cycle on and off. Kettle preset: the 1,500 W kettle of the worked example.. Geprüft am 18. November 2026
  2. [2]Energy Series: Estimating Appliance and Home Electronic Energy Use (BSE-301NP, 2020). Virginia Cooperative Extension, Virginia Tech. Ranges of nameplate wattages for household appliances (preset values are the middle of each range). A motor draws about three times its running current while starting. A refrigerator runs about a third of the time it is plugged in.. Geprüft am 18. November 2026

Formeln und Quellen zuletzt geprüft am 18. November 2026. So rechnen wir