Skip to content
Yardox

How we calculate

Where the numbers come from

Geometry is exact. Material properties are not, so every value that depends on a product or a code, such as the yield of a bag of concrete, the density of gravel or the maximum riser height, comes from a primary source: a standard, a building code or a manufacturer's technical data sheet. Each calculator lists its sources and the date we last checked them.

When a value depends on the product you buy, we show it in the form so you can change it, and we name the product the default comes from.

How we calculate

All calculators follow the same rules:

  • Internally everything is in SI units (metres, cubic metres, kilograms). Feet, inches and cubic yards are converted with the exact international definitions (1 ft = 0.3048 m).
  • Intermediate values are never rounded. We round only the final quantity, and always up to whole bags, sheets or boxes.
  • The steps shown under each result are produced by the same code that calculates it, so the explanation cannot drift from the maths.
  • Unusual inputs, such as a 3 cm slab, produce a warning but still calculate, because sometimes they are right.

How we check

Before a calculator goes live, we check it:

  • against worked examples written out step by step in its specification;
  • against reference values from the sources, for example "45 bags of 0.60 ft³ fill one cubic yard";
  • with the same job entered in metric and imperial units, which must give the same answer;
  • with unusual inputs: zero, very large values, a post larger than its hole.

If a result does not match your data sheet or what you saw on site, write to us. We read every message and correct the calculator.

Limits

Results are estimates for planning and ordering. Real consumption depends on workmanship, site conditions and the exact product. For structural work, follow the design of a qualified engineer and your local building code.