本文へ移動
Yardox
この言語版はネイティブ話者による確認中です。表現が変わる場合があります。

舗装ブロック計算

CMHA(ICPI)の施工ガイドに基づき、通路・テラス・駐車場の舗装ブロック、路盤砕石、敷き砂、掘削深さ、縁石、固まる目地砂の必要量を計算します。

舗装

用途

CMHA: 水はけのよい地盤では、締固め後の路盤厚を100 mm(4 in)以上にします。

ブロック 60 mm砂 25 mm路盤 100 mm仕上げ面から185 mm掘削

施工範囲

舗装ブロック

mm
mm
mm

CMHA: 通路・テラス・駐車場には60 mm。

敷き方

切断用に10 %を加えます(Western Interlock)。

目地

詳細設定
mm

湿った地盤や軟らかい地盤では厚くします。

mm

CMHA: 25 mm(1 in)、敷き均し後・締固め前。

%

空欄の場合は10 %です。

購入するブロック1,100個
Add this calculator to your website

Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.

使い方

  1. 01通路・テラスか駐車場かを選びます。駐車場は厚い路盤が必要です。
  2. 02各範囲を長方形として入力します。L字のテラスは長方形2つに分けます。
  3. 03ラベルのブロック寸法と敷き方を指定します。ヘリンボーンや斜め張りは切断が増えます。
  4. 04ブロック、砕石、砂、掘削深さ、縁石、固まる目地砂を確認し、発注リストをコピーします。

計算方法

層構成はコンクリート舗装用のCMHA(旧ICPI)施工ガイドに従います。締め固めた砕石路盤の上に25 mmの敷き砂とブロックを重ねます。切断ロスはWestern Interlockの値です。

ブロック数
n = ⌈A ×(1 + ロス率)/ (l × a)⌉
砕石路盤
V = A × 厚さ(締固め後)
敷き砂
V = A × 25 mm
掘削深さ
路盤 + 敷き砂 + ブロック
排水勾配
≥ 1.5 % × 長さ

CMHAは水はけのよい地盤で、通路・テラスに最低100 mm、住宅駐車場に150 mmの締固め路盤を求めています。湿った地盤や軟弱地盤では「詳細設定」で厚くしてください。

ロスは直線張り10 %、ヘリンボーン・斜め・曲線で15 %です。後者はWestern Interlockの15–20 %の下限を使っています。

砕石や砂の重量は材質と含水量で変わるため、t数には幅を持たせています。

計算例

5 × 4 mのテラス、200 × 100 mmブロック

  1. 面積20 m²。切断用10 %を加えると22 m² / 1個0.02 m² = 1100個。
  2. 路盤100 mm: 2 m³、約2.2–3.5 t。敷き砂25 mm: 0.5 m³。
  3. 仕上げ面から100 + 25 + 60 = 185 mm掘削します。
  4. 縁石18 m、固まる目地砂3–4袋、長さ5 mで落差75 mm。

発注時のポイント

路盤は層ごとに締め固める

CMHAでは100–150 mmずつ敷き均して締め固めます。一度に厚く敷くと下部が緩いまま残り、後で沈みます。

敷き砂は先に締め固めない

敷き砂は定規で均すだけです。ブロック施工後にプレートで締め固めて落ち着かせます。

建物から外へ勾配を取る

壁から離れる方向へ最低1.5 %の勾配を付け、水を流して路盤の浸水を防ぎます。

よくある間違い

  • 納品時と締固め後の砕石体積を同じと考えること。
  • 駐車場をテラスと同じ路盤厚にすること。
  • 路盤の凹凸を厚い敷き砂で埋めること。
  • 縁石を忘れ、外側のブロックが開いていくこと。

よくある質問

ブロック下の路盤厚は?

水はけのよい地盤では、CMHAは通路・テラスに締固め砕石100 mm以上、駐車場に150 mm以上、さらに敷き砂25 mmとしています。湿った地盤や粘土質では厚くします。

ブロックは何個必要ですか?

面積を1個の面積で割り、切断用に10 %、ヘリンボーンや斜め張りなら15 %を加えます。20 m²に200 × 100 mmなら1100個です。

テラスはどの深さまで掘りますか?

路盤、砂、ブロック厚を足します。厚さ6 cmのブロックなら100 + 25 + 60 = 185 mmです。

固まる目地砂はどのくらい必要ですか?

Rochester Concrete Productsでは22.7 kg袋で、狭い目地は5.6–7 m²、広い目地は2.3–3.7 m²です。使用する袋の施工面積を確認してください。

このテーマのガイド

出典

  1. [1]Construction of Interlocking Concrete Pavements (PAV-TEC-002-22). Concrete Masonry & Hardscapes Association (CMHA, formerly ICPI). Aggregate base at least 4 in (100 mm) for sidewalks and patios and 6 in (150 mm) for residential driveways on well-drained soils, thicker on wet or weak soils; bedding sand 1 in (25 mm) uncompacted; base compacted in 4–6 in lifts; joints 2–5 mm; slopes at least 1.5 %; pavers 60 mm thick for pedestrian areas and driveways.. 確認日: 2026年11月6日
  2. [2]How to calculate paver stones needed for your project. Western Interlock (Basalite Building Products). Add 10 % for straight-lay patterns, 15–20 % for diagonal, herringbone or curved layouts.. 確認日: 2026年11月6日
  3. [3]Paver Installation Guide (2018). Rochester Concrete Products. Base volume = paver area × base depth; polymeric sand, 50 lb bag per 60–75 sq ft with narrow joints or 25–40 sq ft with wide joints.. 確認日: 2026年11月6日
  4. [4]Classification of aggregates (after Mindess, Concrete). Penn State University, CE 584 course library. Normal-weight aggregate (gravel, crushed stone): dry-rodded unit weight 1100 to 1750 kg/m³.. 確認日: 2026年11月5日
  5. [5]Material conversions for winter parking lot and sidewalk maintenance. Minnesota Pollution Control Agency, Minnesota Stormwater Manual. Clean sand: 1 cubic yard = 1.4 tons (1.66 t/m³); weight varies with moisture.. 確認日: 2026年11月5日
  6. [6]Produktdatenblatt Bruchsand 0/2. Leube Baustoffe. Crushed sand 0/2: bulk density 1.5 t/m³.. 確認日: 2026年11月5日

計算式と出典の最終確認日: 2026年11月6日。 計算方法