İçeriğe geç
Yardox
Bu dil sürümü, ana dili bu dil olan bir editör tarafından inceleniyor. Bazı ifadeler değişebilir.

Rainwater tank calculator

Find how big a rainwater tank should be for your roof, your rainfall and what you use the water for.

Your roof and water use

Yearly rain from the roof, compared with what you use. The tank holds about three weeks of the smaller of the two, as in the German rainwater standard DIN 1989-1.

House with gutter, downpipe, first-flush diverter and an underground rainwater tank67,2 m³ a year3.504 l

Rain from the roof

m²

Area seen from above, not along the slope. Only the parts that drain into the tank.

mm

Long-term average for your town, from the national weather service.

%

Share of the rain that reaches the tank. 75–90 % for hard roofs; much less for green roofs and gravel.

What the water is for

l/day

For toilets and the washing machine. About 40 l (10 gal) a day; 0 if the water is only for the garden.

m²

Lawn and beds you water with rainwater; 0 for none.

l/m²·yr

Per year. About 80–200 l/m² (2–5 gal/ft²), more on sandy soil and in dry places.

Tank size3.504 l
Add this calculator to your website

Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.

Nasıl kullanılır?

  1. 01Enter the roof area that drains into the tank, measured from above, and the average yearly rainfall for your town.
  2. 02Keep the collection efficiency at 80 % for a tiled, shingle or metal roof; lower it for a green or gravel roof.
  3. 03Enter how many people use rainwater for toilets and laundry, and the garden area you water with it.
  4. 04Read the tank size. It holds about three weeks of the smaller of the two: the rain you collect or the water you use.

Nasıl hesaplanır?

A tank only pays off up to a point. If it is much larger than the roof can fill, or than you can use, the extra volume stands empty. The German rainwater standard DIN 1989-1 therefore sizes the tank from both the yearly yield and the yearly use, and takes the smaller one.

Yearly yield
roof area × rainfall × efficiency
Yearly use
people × litres per day × 365 + garden × litres per m²
Tank
0.06 × min(yield, use)
First-flush diverter
1 to 2 gal per 100 ft² of roof

One millimetre of rain on one square metre is one litre. In US units, an inch of rain on a square foot gives 0.62 gallons. Not all of it reaches the tank: the Texas Water Development Board plans with 75 to 90 % for hard roofs, about 80 % as a rule.

The factor 0.06 is the average reserve for three weeks, as the Bavarian water authority explains the simplified method of DIN 1989-1. With 600 to 1,200 mm of rain it gives 25 to 50 l of tank per m² of hard roof, and 10 to 20 l on a green roof.

The same guidance gives 800 to 1,000 l of tank per resident for toilets and laundry. That is about 40 l of rainwater per person and day, the default here. Gardens take 80 to 200 l per m² and year.

For large buildings or very uneven rainfall, a month-by-month balance or a simulation gives a better size. The Texas manual shows the monthly method: start with the stored water, add the month's rain, subtract the use.

Çözümlü örnek

A 120 m² roof, 700 mm of rain, four people

  1. Yield: 120 × 700 × 0.8 = 67,200 l a year.
  2. Use: 4 × 40 l × 365 = 58,400 l a year for toilets and laundry.
  3. The use is smaller, so the tank is sized by it: 0.06 × 58,400 = 3,504 l.
  4. A tank of about 3,500 l, the next common size up, will do. The rain covers the yearly use, though dry summers still need mains backup.

Sipariş için ipuçları

Look up real rainfall

National weather services publish long-term averages by town. Rain varies a lot even within one country, so do not use a national average.

Fit a filter and a first-flush diverter

Leaves and the dirty first minutes of rain should not reach the tank. A filter in the downpipe and a diverter keep the water clear.

Plan an overflow

A full tank needs an overflow to a soakaway or sewer, as allowed locally. Check with the local authority before you dig.

Keep drinking water separate

Rainwater pipes for toilets and laundry must never connect to the drinking water system. Mark them and use a proper backflow break for the mains top-up.

Sık yapılan hatalar

  • Measuring the roof along the slope. Rain falls on the area seen from above.
  • Buying the biggest tank that fits. If the roof or your use cannot fill it, you pay for empty space.
  • Counting a green roof like a tiled one. Plants and soil keep most of the rain.
  • Forgetting the first-flush diverter and filter, so the tank fills with silt.

Sorular

How much rainwater can I collect from my roof?

Roof area seen from above × yearly rainfall × about 0.8. A 100 m² roof with 700 mm of rain gives about 56,000 l a year; in US units, about 0.5 gallons per square foot per inch of rain.

What size rainwater tank do I need?

About 6 % of the smaller of the yearly yield and the yearly use. For a family of four using rainwater for toilets and laundry, that is about 3,500 l.

Is a bigger tank better?

Only up to the size the roof and your use can turn over. Beyond that the water stands longer and the extra volume rarely fills.

Can I drink rainwater from the tank?

Not without treatment that meets the local drinking water rules. This calculator is for toilets, laundry and the garden.

Bu konudaki rehberler

Kaynaklar

  1. [1]The Texas Manual on Rainwater Harvesting, 3rd edition (2005). Texas Water Development Board. Supply = rainfall (in) × roof area (ft²) × 0.62 gal/ft² per inch × collection efficiency (p. 38); installers assume 75 to 90 % efficiency (p. 30); about 10 % loss on tile and shingle roofs (p. 6); first-flush diversion of 1 to 2 gallons per 100 ft² of roof (p. 8).. Kontrol tarihi: 11 Kasım 2026
  2. [2]Rainwater Volumes from Roof Runoff. Texas Water Development Board. Collection efficiency of about 80 % for planning: roughly 1,000 gallons per inch of rain on a 2,000 ft² roof.. Kontrol tarihi: 11 Kasım 2026
  3. [3]Hinweise zur Regenwassernutzung (November 2004). Bayerisches Landesamt für Wasserwirtschaft. Storage after DIN 1989-1: work out the volume from the yield and from the demand, take the smaller; × 0.06 gives the average reserve for three weeks. For 600 to 1,200 mm of rain, hard roofs give 25 to 50 l and green roofs 10 to 20 l of storage per m²; households 800 to 1,000 l per resident; gardens 80 to 200 l per m² and year.. Kontrol tarihi: 11 Kasım 2026

Formüllerin ve kaynakların son kontrol tarihi: 11 Kasım 2026. Nasıl hesaplıyoruz?