Skip to content
Yardox

How much does gravel weigh per cubic yard or cubic metre?

Gravel is priced by the ton and spread by the cubic yard, so the weight per cubic yard is the number that connects your plan to your invoice. It is not one number, and the range is wide.

Updated November 10, 2026

Short answer

A cubic yard of gravel or crushed stone weighs roughly 0.9 to 1.5 short tons (1,850 to 2,950 lb), which is 1.1 to 1.75 tonnes per m³. Clean sand is about 1.4 tons per cubic yard (1.66 t/m³). Ask the supplier for the figure for the stone you are buying.

Calculate it

Gravel and sand calculator

Cubic metres or yards to tonnes, with compaction.

Gravel and sand calculator →

Weight of gravel, sand and topsoil

Penn State's course notes after Mindess list the dry-rodded unit weight of normal-weight aggregate, which covers gravel and crushed stone, as 1,100 to 1,750 kg/m³. The Minnesota Pollution Control Agency gives a cubic yard of clean sand as 1.4 tons. Leube lists 1.5 t/m³ for crushed sand 0/2 (grain size 0 to 2 mm), and Holcim lists screened topsoil at about 1.2 to 1.5 t/m³. The table converts each figure to the other unit, using 1 yd³ = 0.7646 m³ and a short ton of 2,000 lb.

Bulk density by material and in each unit
Materialkg/m³lb/yd³Short tons/yd³
Gravel and crushed stone, dry-rodded1,100–1,7501,854–2,9500.93–1.47
Clean sand1,6602,8001.40
Crushed sand 0/21,5002,5281.26
Screened topsoil1,200–1,5002,023–2,5281.01–1.26

Note that a metric tonne is 1,000 kg, while a US ton is 2,000 lb, about 907 kg. The two differ by roughly 10 %, which matters on a bulk order.

Why the range is so wide

Gravel and crushed stone cover many kinds of rock and many size mixes. The Penn State range of 1,100 to 1,750 kg/m³ is the spread within one class, normal-weight aggregate. The top of the range is about 60 % above the bottom.

Water adds to it. The MPCA states that its weights vary with moisture content, so wet pile material weighs more than the figure for dry. Treat any weight per cubic yard as an estimate, and use the number from the supplier's product data sheet or ticket for the stone you actually order.

Tons to cubic yards and back

The conversion is one multiplication either way. The MPCA gives it for clean sand: multiply cubic yards by 1.4 to get tons, divide tons by 1.4 to get cubic yards. For any other material, replace 1.4 with that material's tons per cubic yard.

Going from a metric density in t/m³ to US tons per cubic yard: multiply by 0.7646 for tonnes per yard, then divide by 0.9072 for short tons. Sand at 1.5 t/m³ is 1.5 × 0.7646 / 0.9072 = 1.26 tons per yard.

  • 5 tons of clean sand: 5 / 1.4 = 3.6 cubic yards.
  • 3 cubic yards of clean sand: 3 × 1.4 = 4.2 tons.
  • 2 m³ of crushed sand 0/2: 2 × 1.5 = 3.0 tonnes.

Worked example: a gravel path in feet

A path 20 ft long, 3 ft wide and 4 in deep: 20 × 3 × 4/12 = 20 ft³, or 0.74 yd³.

  • At the low end, 0.93 tons per yard: 0.74 × 0.93 = 0.69 tons.
  • At the high end, 1.47 tons per yard: 0.74 × 1.47 = 1.09 tons.
  • The same path in clean sand: 0.74 × 1.4 = 1.04 tons.

The gravel answer is between 0.7 and 1.1 tons depending on the stone. That is why you ask for the weight per yard before you order by the ton.

Worked example: the same in metres

A bed 6 m long, 1 m wide and 0.1 m deep holds 0.6 m³.

  • Gravel at 1.1 t/m³: 0.66 tonnes. At 1.75 t/m³: 1.05 tonnes.
  • Clean sand at 1.66 t/m³: 1.00 tonne.

If you order by volume, 0.6 m³ is the number to quote and the weight takes care of itself. Add the waste or compaction your job calls for before you convert to weight.

Ordering by weight or by volume

When the supplier sells by the ton, multiply your volume by the supplier's tons per cubic yard. When it sells by the cubic yard or cubic metre, order the volume and let the truck weight vary. Weight matters for delivery too, so ask what a yard of that stone weighs. The calculator lets you pick the material, uses the ranges above, and shows the weight at both ends.

Questions

How much does a cubic yard of gravel weigh?

Roughly 0.93 to 1.47 short tons (1,850 to 2,950 lb), from a dry-rodded range of 1,100 to 1,750 kg/m³. The exact figure depends on the stone and its moisture. Ask the supplier.

How much does a cubic yard of sand weigh?

About 1.4 tons (2,800 lb) for clean sand, according to the MPCA. Weights vary with moisture content.

How many cubic yards are in a ton of gravel?

Divide 1 by the tons per cubic yard for your stone. At 0.93 to 1.47 tons per yard, a ton is 1.08 to 0.68 cubic yards.

How much does a cubic metre of gravel weigh?

1.1 to 1.75 tonnes, based on a unit weight of 1,100 to 1,750 kg/m³ for normal-weight aggregate.

How many tons of sand are in 3 cubic yards?

3 × 1.4 = 4.2 tons of clean sand, according to the MPCA conversion.

Is a ton the same everywhere?

No. A US short ton is 2,000 lb (about 907 kg). A metric tonne is 1,000 kg. Check which one a price list means.

Calculate it

Gravel and sand calculator

Cubic metres or yards to tonnes, with compaction.

Gravel and sand calculator →

Sources

  1. [1]Produktdatenblatt Mutterboden, gesiebt 0/16 (Kieswerk Tönisvorst, 27.08.2020). Holcim (Deutschland) GmbH. Screened topsoil: bulk density about 1.2 to 1.5 t/m³.. Checked November 5, 2026
  2. [2]Produktdatenblatt Bruchsand 0/2. Leube Baustoffe. Crushed sand 0/2: bulk density 1.5 t/m³.. Checked November 5, 2026
  3. [3]Material conversions for winter parking lot and sidewalk maintenance. Minnesota Pollution Control Agency, Minnesota Stormwater Manual. Clean sand: 1 cubic yard = 1.4 tons (1.66 t/m³); weight varies with moisture.. Checked November 5, 2026
  4. [4]Classification of aggregates (after Mindess, Concrete). Penn State University, CE 584 course library. Normal-weight aggregate (gravel, crushed stone): dry-rodded unit weight 1100 to 1750 kg/m³.. Checked November 5, 2026