Skip to content
Yardox

How much extra tile should I buy?

Tile is sold in boxes, cut on site and rarely reordered in the same batch. The right extra depends on how the tiles are laid, and how much of that extra you have already counted.

Updated November 10, 2026

Short answer

Clé Tile advises at least 15 % extra when cuts are not counted, and puts breakage in transit alone at 2–4 %. For a 3 × 4 m floor in 600 mm tiles, that means 37 tiles laid straight and 40 laid diagonally, which is 10 boxes of four either way.

Calculate it

Tile calculator

Tiles, boxes, adhesive and grout for floors and walls.

Tile calculator →

Two ways to count, two different extras

The first way is to take the floor area, divide by the area of one tile and add a percentage. The percentage then has to cover the cuts at every wall, breakage and a few spare tiles. Clé Tile suggests at least 15 % for that, and mentions 2–4 % breakage in moving and shipping on its own.

The second way is to draw the layout and count tiles row by row. A partial tile at the wall still costs a whole tile, so the cuts are already in the count. What is left to add is breakage and a few spares for later repairs, which is why the calculator adds only a 5 % reserve on top of a counted layout. You can change that figure.

Do not stack the two methods. Counting rows and then adding 15 % buys tiles you will never lay.

How the pattern changes the count

Straight (grid) and half-bond (brick) layouts follow the rows, so the calculator counts them tile by tile. In a half-bond layout every second row starts with half a tile, so each of those rows needs half a tile more than a straight row.

Diagonal and herringbone layouts cut a tile at almost every edge, and the offcuts rarely fit anywhere else. The calculator takes the area, divides by one tile with its joint, and adds 15 % for cuts, which follows the Clé Tile figure. Alpine Floor, a herringbone flooring maker, recommends 10–15 % for herringbone and up to 20 % in rooms with many corners and alcoves.

Straightcounted tile by tileHalf-bondcounted tile by tileDiagonalarea + 15 % for cutsHerringbonearea + 15 % for cuts
Straight and half-bond layouts are counted row by row, and the shaded cut tiles are part of that count. Diagonal and herringbone layouts get 15 % on top of the area for cuts.

Worked example: a 3 × 4 m floor, 600 × 600 mm tiles

Joint 3 mm. The pitch of one tile is 603 mm. Net area 12 m², which is 33.3 tiles with no joint and no cuts.

Tiles for a 3 × 4 m floor, 600 mm tiles, 3 mm joint
LayoutCountedWith 5 % reserveBoxes of 4 tiles
Straight35 (5 × 7)3710
Half-bond384010
Diagonalabout 38 (area + 15 %)4010

Five tiles fit across 3 m and seven along 4 m only because the last tile in each row is cut. A box of four holds 1.44 m², so 37 and 40 tiles both come to 10 boxes. In this room the box size, not the layout, decides what you carry home; the layout only changes how many spares are left over.

Imperial: a 10 × 12 ft room in 12 × 12 in tiles with a 1/8 in joint takes 120 tiles laid straight and 126 with the 5 % reserve. Laid diagonally, the area method gives 135 tiles and 142 with the reserve. With boxes of 10 that is 13 boxes against 15.

Buying by the box

Boxes are listed either by the number of tiles or by the area they cover. Divide the tile count by the tiles per box, or the tile count times the area of one tile by the area per box, and round up once at the end. Rounding each room first and adding the results buys extra boxes you do not need.

Clé Tile also advises keeping a few tiles after the job for later repairs, for example when a plumber has to open the wall. That reserve is part of the extra, not an addition to it.

What the grout joint changes

Almost nothing in the tile count. For 300 × 300 mm tiles on 12 m², a 2 mm joint gives 131.6 tiles of area and a 5 mm joint gives 129.0, a difference of under three tiles. The overage covers that many times over.

The joint matters for the grout. MAPEI gives the consumption of Ultracolor Plus as (A + B) / (A × B) × C × D × 1.6 in kg/m², with A and B the tile sides, C the tile thickness and D the joint width, all in mm, for joints from 2 to 20 mm wide. SikaCeram Tile Grout uses the same formula with a factor of 1.4. Consumption grows in direct proportion to the joint width and the tile thickness.

Grout consumption, MAPEI Ultracolor Plus formula, 8 mm thick tile
TileJointkg per m²
300 × 300 mm2 mm0.17
300 × 300 mm3 mm0.26
300 × 300 mm5 mm0.43

For the same 300 mm tile and a 3 mm joint, the SikaCeram formula gives 0.22 kg/m². Adhesive is chosen by tile size instead: Ceresit CM 11 lists 2.0 kg/m² for a 4 mm notch (tiles up to 10 cm), 2.7 for 6 mm (up to 15 cm), 3.4 for 8 mm (up to 25 cm) and 4.2 for 10 mm (up to 30 cm). Ceresit notes that consumption varies with the evenness of the substrate and the type of tile.

Questions

How much extra tile should I buy?

Clé Tile advises at least 15 % when you do not count cuts. If you count the layout tile by tile, the cuts are already included and a 5 % reserve for breakage and repairs is the calculator default.

How much extra for diagonal tile?

The calculator adds 15 % for cuts, following Clé Tile, and then the reserve. For a 3 × 4 m floor in 600 mm tiles that is 40 tiles instead of 37 for a straight layout.

How much extra for herringbone?

Alpine Floor recommends 10–15 % for herringbone, up to 20 % in rooms with many corners and alcoves. Take the upper end for small, broken-up rooms.

Does the grout joint change how many tiles I need?

Hardly. Going from a 2 mm to a 5 mm joint on 300 mm tiles saves under three tiles on 12 m². It changes the grout much more, because consumption grows with the joint width.

Should I keep spare tiles?

Yes. Clé Tile advises keeping some for future repairs. Count them inside your extra, not on top of it.

Calculate it

Tile calculator

Tiles, boxes, adhesive and grout for floors and walls.

Tile calculator →

Sources

  1. [1]Ceresit CM 11 – Technical Data Sheet (11/2023). Henkel. Adhesive consumption by notch depth: 4 mm 2.0 kg/m² (tiles up to 10 cm), 6 mm 2.7 (up to 15 cm), 8 mm 3.4 (up to 25 cm), 10 mm 4.2 (up to 30 cm). Checked November 5, 2026
  2. [2]Ultracolor Plus – Technical Data Sheet (10/2017, UK). MAPEI. Grout consumption formula (A + B) / (A × B) × C × D × 1.6 = kg/m², A, B tile sides, C tile thickness, D joint width, all in mm. Checked November 5, 2026
  3. [3]SikaCeram Tile Grout – Product Data Sheet. Sika. Grout consumption g/m² = joint width × tile thickness × (C + D) / (C × D) × 140, C, D in cm (the same formula with a factor of 1.4). Checked November 5, 2026
  4. [4]Why does the size calculator automatically add 10%?. Clé Tile. Overage for cuts, breakage in transit (2–4 %) and spare tiles; at least 15 % overall when cuts are not counted. Checked November 5, 2026
  5. [5]How Much Extra Herringbone Flooring Do You Need? A Waste Calculation Guide. Alpine Floor. Herringbone waste: 10–15 %, up to 20 % in rooms with many corners and alcoves. Checked November 5, 2026