本文へ移動
Yardox
この言語版はネイティブ話者による確認中です。表現が変わる場合があります。

Baluster calculator

Find how many balusters a railing needs and where to mark them, so no gap is wider than the code allows.

Your railing

Balusters spaced evenly between two posts, with the fewest pieces that keep every gap below the limit of the rule you choose.

Railing section between two posts with evenly spaced balusters114 mm1,500 mm

Section and rule

mm

Measured between the faces of the posts.

Equal sections along the deck, stair or landing.

mm

Seen from the side, at the widest point.

From the state building codes; 90 cm high on stairs, more on balconies and above 12 m of fall.

Balusters9
Add this calculator to your website

Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.

使い方

  1. 01Measure the clear span between the faces of two posts.
  2. 02Enter how many sections of that length the railing has, and the width of one baluster at its widest point.
  3. 03Choose the rule that applies where you build, or enter your own largest gap.
  4. 04Read the number of balusters, then mark the first centre from the post and step along the rail by the centre-to-centre spacing.

計算方法

Railing rules limit the openings so that a small child's head cannot pass. The rule is written as a sphere that must not fit through: 4 in under the IRC, 100 mm in England and Wales. German state building codes allow at most 12 cm between bars. The calculator finds the fewest balusters that keep every gap below that size, and spaces them evenly so the post gaps match the rest.

Balusters per section
n = floor((span − limit) / (width + limit)) + 1
Gap
(span − n × width) / (n + 1)
Centre to centre
gap + width
First centre
gap + width / 2 from the post

The gap has to be smaller than the limit, not equal to it, because a sphere of exactly that size could just pass. When the numbers come out even, the calculator adds one more baluster.

Under the IRC, guards are needed on open sides more than 30 in above the floor or ground below and must be at least 36 in high. The triangle formed by the tread, the riser and the bottom rail of a stair may pass a 6 in sphere, and the open sides of stair treads 4 3/8 in.

In England, Wales and Northern Ireland, private stairs and landings need guarding 900 mm high where the drop is more than 600 mm, and the balustrade should not be easy for children to climb. In Germany the state building codes and DIN 18065 set the rules; stair railings are 90 cm high, 110 cm above 12 m of fall.

計算例

A 6 ft deck section with 1.5 in balusters under the IRC

  1. (72 − 4) / (1.5 + 4) = 12.4, rounded down 12, plus 1: 13 balusters.
  2. Gap: (72 − 13 × 1.5) / 14 = 3.75 in, below 4 in.
  3. Mark the first centre 4.5 in from the post, then every 5.25 in.
  4. In metric: a 1500 mm section with 40 mm bars and a 12 cm limit takes 9 bars with 114 mm gaps.

発注時のポイント

Mark from the middle on long runs

Small errors add up along the rail. Mark the centre of the section first and work out to both posts, so both end gaps stay equal.

Cut a spacer block

A block cut to the gap width makes fixing quick and keeps every gap the same.

Measure turned balusters at the widest point

The gap that counts is the smallest opening, which is between the widest parts of two balusters.

Mind the bottom gap

The space between the bottom rail and the deck or stair counts as an opening too. Keep it within the same limit.

よくある間違い

  • Spacing balusters at the limit exactly. A gap equal to the sphere size fails.
  • Measuring the span between post centres instead of post faces.
  • Forgetting the end gaps at the posts, so they come out wider than the rest.
  • Using horizontal rails that children can climb like a ladder where the rules ask for climb-resistant guarding.

よくある質問

What is the maximum baluster spacing?

Under the IRC, the gap must not let a 4 in sphere pass. In England and Wales the limit is a 100 mm sphere, in Germany 12 cm between bars.

How many balusters per foot?

With 1.5 in balusters and gaps just under 4 in, about 2.3 per foot (one every 5.25 in). Work it out per section, because the posts change the count.

How high must a deck railing be?

Under the IRC at least 36 in where the deck is more than 30 in above the ground. Local rules can ask for more.

Do I measure from the post centre?

No. Measure the clear span between the faces of the posts.

このテーマのガイド

出典

  1. [1]Residential Stair Guide: visual interpretation of the IRC (2022). City of White Bear Lake Building Department. IRC R312.1.3: guards must not let a 4 in (102 mm) sphere pass; the triangle at tread, riser and bottom rail may pass 6 in; on the open sides of stair treads 4 3/8 in. Handrail height 34 to 38 in (R311.7.8.1).. 確認日: 2026年11月12日
  2. [2]Guard height and baluster spacing, IRC 2021 R312.1. Jaspector. Guards required on open sides more than 30 in above the floor or grade below; at least 36 in high.. 確認日: 2026年11月12日
  3. [3]NHBC Standards 6.6.10 Guarding. NHBC. Guarding where the drop is more than 600 mm; private stairs in England, Wales and Northern Ireland 900 mm high for flights and landings; balustrading must not let a 100 mm sphere pass and should not be easy for children to climb.. 確認日: 2026年11月12日
  4. [4]Geländer: Vorschriften und Normen. TÜV SÜD. Germany: at most 12 cm between bars, and at most 12 cm free space under a balcony railing; stair railings 90 cm high, 110 cm above 12 m of fall height; rules come from the state building codes and DIN 18065.. 確認日: 2026年11月12日

計算式と出典の最終確認日: 2026年11月12日。 計算方法