Screed and self-levelling calculator
Measure the depth at a few points, get the average thickness, and see how many bags of screed or self-levelling compound the floor needs.
Floor
Room
Depth at several points
Stretch a string or laser line at the finished level and measure down to the floor at the high spots, the low spots and in between.
Product
1.43 kg/m² per mm, at least 0.125 in over the high spots, bag 40 lb.
Leave empty for 40 lb.
For spillage and mixing loss. The data sheets give none; 0 means exact.
Add this calculator to your website
Free for any website: paste this code where the calculator should appear. It keeps itself up to date, fits its height to the content and links back to the full page with the explanations.
How to use it
- 01Enter the room size.
- 02Mark the finished floor level with a string, a straight board or a laser. Measure down from it to the substrate at the high spots, the low spots and a few points in between.
- 03Pick the product. If yours is not listed, choose Other and copy the coverage from the bag: square feet per bag at a given thickness.
- 04Read the bags to buy. Check the warnings: every product has a minimum and often a maximum thickness per pour.
How it is calculated
A floor is never flat, so a single depth gives a wrong answer. The average of several measured depths is the thickness you will pour on average.
- Average thickness
- h = (h₁ + h₂ + … + hₙ) / n
- Dry mix
- m = area × h (mm) × consumption (kg/m²·mm)
- From bag coverage
- consumption = bag weight / (coverage × thickness)
- Bags
- ceil(m × (1 + extra) / bag weight)
Henry 555 LevelPro: a 40 lb bag covers 43 sq ft at 1/8 in, which is 1.43 kg per m² per mm, and it must be at least 1/8 in over the high spots.
MAPEI Ultraplan Eco: 1.6 kg/m² per mm, 1 to 10 mm per layer. SAKRET levelling compound: 1.7 kg/m² per mm, 3 to 20 mm. SAKRET cement screed: about 20 kg/m² per cm, 30 to 60 mm bonded.
The calculator flags any point thinner than the product minimum or thicker than its maximum for one layer. Thicker spots need a second pour or a different product.
Worked example
Room 12 × 10 ft, depths 1/8, 1/4 and 3/8 in, Henry 555
- Average: (0.125 + 0.25 + 0.375) / 3 = 0.25 in.
- One bag covers 43 sq ft at 1/8 in, so 21.5 sq ft at 1/4 in.
- Bags: 120 / 21.5 = 5.6, so 6 bags of 40 lb.
Getting the order right
Measure on a grid
On a big floor, measure every metre or every three feet in both directions. More points give a better average.
Prime first
Self-levelling compounds need the primer the maker specifies. Without it the substrate pulls water out and the surface cracks.
Mix whole bags
Self-levellers are mixed bag by bag with a measured amount of water. Have enough bags on site before you start; you cannot stop halfway.
Common mistakes
- Using one depth from the lowest corner for the whole floor.
- Pouring thinner than the product minimum over high spots.
- Pouring a self-leveller thicker than its maximum per layer.
- Running out mid-pour and leaving a cold joint.
Questions
How much self-leveler do I need for 100 sq ft at 1/4 in?
With Henry 555 (43 sq ft per 40 lb bag at 1/8 in): 100 / 21.5 = 4.7, so 5 bags.
How much does screed weigh per square metre?
Cement screed from SAKRET takes about 20 kg/m² per cm, so 2 kg per m² per mm.
How do I find the average thickness?
Mark the finished level, measure down to the floor at several points and divide the sum by the number of points.
Can I pour 2 in of self-leveler?
Only if the data sheet allows it. Many smoothing compounds stop at 10 mm or 3/8 in per layer.
Guides on this topic
- How much self-leveling compound per mm of thickness
Self-leveler and screed consumption per m² and per mm, bags needed for a given thickness, and the minimum and maximum layer from SAKRET, MAPEI and Henry.
Related calculators
Sources
- [1]Technisches Merkblatt SAKRET Beton-Estrich (Stand 14.06.2018). SAKRET Trockenbaustoffe Europa GmbH & Co. KG. Cement screed: about 20 kg/m² per cm on even substrates; bonded 30–60 mm, on a separating layer 35–60 mm, floating on insulation 40–60 mm; bags of 10, 25 and 40 kg.. Checked November 5, 2026
- [2]Technisches Merkblatt SAKRET Ausgleichsmasse universal (Stand 13.02.2018). SAKRET Trockenbaustoffe Europa GmbH & Co. KG. Levelling compound: about 1.7 kg/m² per mm; 3–20 mm; 20 kg bag.. Checked November 5, 2026
- [3]Ultraplan Eco: product page and technical data. MAPEI. Self-levelling smoothing compound: 1.6 kg/m² per mm; 1 to 10 mm per layer; 23 kg bag.. Checked November 5, 2026
- [4]HENRY 555 LevelPro Self-Leveling Underlayment, product data. W. W. Henry Company. 40 lb bag covers 43 sq ft at 1/8 in (1.43 kg/m² per mm); at least 1/8 in over the high points.. Checked November 5, 2026
Formulas and sources last checked on November 5, 2026. How we calculate